Your are location： Home » Products » Coating machine series

BF-520BoppCoating tape machine

Overview

1. Automatic rewind and exchange of large rolls
2. Automatic feeding
3. Automatic cycle gluing, automatic gluing
4. Winding frequency conversion, traction frequency conversion, adhesive frequency conversion
5. Unwinding tension control
6. Automatic tension for winding
7. The wire rod is coated with adhesive evenly and has good adhesion
8. Double layer hot air circulation, constant temperature heating, energy-saving and energy-saving
9. Oven side opening design, film penetration, easy to handle faults during work
10. Arc oven runway design with controllable speed output
11. Automatic deviation correction for discharge, neat edge winding, generous and standardized
12. Automatic counting, controllable
13. Independent control cabinet, partition control function, welcome new and old customers to place orders!

Product Features

The machine mainly consists of a coating substrate unwinding unit, a coating unit, an oven and hot air system, a winding unit, electrical control, and corresponding control instruments.

Main technical parameters

Machine flow direction	From the operation side: the coating unit is on the left and the material receiving is on the right
Power supply	3-phase 5-wire system, 50Hz, 380V ± 10%
Air supply pressure	0.8Mpa
Coating substrate	BOPP
Glue type	Water based adhesive
Adhesive viscosity	100-1000mPa. s
Solid content	53-65%
Coating method	Scraping or wire rod coating
Coating amount (dry adhesive)	20-60g/m2
Tension range	1-10kg
Maximum width of material	520mm
Guide roller width	550-600mm
Mechanical maximum speed	0-60m/min
Maximum working speed	0-40m/min
Paper core specifications	3 "(inner diameter Φ 76mm)
Unwinding diameter	Φ 600mm
Winding diameter	Φ 600mm
Material roll support method	3 ″ inflatable shaft
Drying oven length	10-12m
Maximum drying temperature	120 ℃
Heating method	Hot air drying
Whole machine control	Centralized operation
Total power	Approximately 55-85kW
Machine weight	Approximately 3500kg
Machine external dimensions	Approximately 13500; Mm (length) × 1300mm (width) × 2800